7-Outlet/6-Plug & 9-Outlet/8-Plug Surge Protector Power Strips

7-switch 6-outlet / 9-switch 8-outlet surge-protected power strip | 15A 1650W

• Two-in-one switch design (main switch + overload protection switch): the main switch controls power to the entire outlet group. When the total load exceeds the rated capacity of 1650W, the overload protection switch trips automatically and cuts power. After removing the overloaded device and letting the protection device reset, simply turn the power back on to resume normal use.
• Independent illuminated power switches: each outlet has its own power switch with an LED indicator, letting you control power to a single device without repeated plugging and unplugging — reducing standby power draw and extending the outlet's service life.
• Wall-mountable dual keyhole design: dual keyhole slots on the back allow horizontal or vertical mounting to a wall, under a desk, or on the back of a cabinet, making cable routing easier and improving space efficiency.
• VCTF 3×2.0mm² double-insulated cable: uses a CNS-compliant VCTF three-core cable with a 2.0mm² conductor cross-section. The double-layer inner and outer insulation and high current-carrying capacity keep the wire from overheating.
• 4N high-purity oxygen-free copper conductor: the conductor uses 4N-grade 99.99% high-purity oxygen-free copper, offering low resistance and high conductivity to reduce power transmission loss and maintain stable voltage.
• One-piece thick copper contact design: the outlet uses a thickened, one-piece copper contact plate. The solder-free design lowers contact resistance, improves conductive efficiency, and prevents localized overheating or fire caused by abnormal temperature rise.
• High-durability copper contact clamping: a reinforced, spring-loaded outlet design increases contact clamping force, preventing looseness, poor contact, and arcing from repeated plugging and unplugging, for safer power use.
• Surge protection: a built-in surge absorber absorbs transient overvoltage caused by lightning strikes or power system faults, limiting surges to a safe range and protecting connected devices.
• Surge protection status indicator: an LED indicator shows the surge protection status — lit means protection is functioning normally, off means the surge absorber has been depleted.
  ※ When the indicator is off, the outlet still supplies power normally but no longer provides surge protection.
• UL94 V-0 flame-retardant housing: the housing is made of Chi Mei PC-6600 engineering plastic, meeting the UL94 V-0 highest flame-retardant rating, heat-resistant up to 125°C, and passing the 750°C glow-wire test.

Product specifications

[7-switch 6-outlet surge-protected power strip]

BSMI commodity inspection registration no.: R3E227
Verified model: HS-606A
Complies with EU RoHS restriction of hazardous substances (RoHS Compliant)
Rated voltage: AC 125V
Rated current: 15A
Rated capacity: MAX 1650W
Outlet spec: 3P grounded outlet ×6
Switch configuration: main switch ×1, independent illuminated switches ×6
Power cable spec: VCTF 3×2.0mm²
Product dimensions: 27.8 × 6.5 × 3.2 cm (L × W × H)
Ground wire color: green
Max surge absorption voltage: 520V
Max surge absorption current: 4500A
Max surge absorption energy: 57J
Operating environment: 0°C to 40°C; relative humidity 30% to 90%
Mounting method: dual keyhole slots on the back; recommended to secure with M4 or M5 flat-head screws (25mm or longer), 2 total
Made in China (developed and supervised in Taiwan)
Shelf life: 10 years (unopened)
This product is covered by NT$20 million product liability insurance

[9-switch 8-outlet surge-protected power strip]

BSMI commodity inspection registration no.: R3E227
Verified model: HS-808A
Complies with EU RoHS restriction of hazardous substances (RoHS Compliant)
Rated voltage: AC 125V
Rated current: 15A
Rated capacity: MAX 1650W
Outlet spec: 3P grounded outlet ×6
Switch configuration: main switch ×1, independent illuminated switches ×6
Power cable spec: VCTF 3×2.0mm²
Product dimensions: 27.8 × 6.5 × 3.2 cm (L × W × H)
Ground wire color: green
Max surge absorption voltage: 520V
Max surge absorption current: 4500A
Max surge absorption energy: 57J
Operating environment: 0°C to 40°C; relative humidity 30% to 90%
Mounting method: dual keyhole slots on the back; recommended to secure with M4 or M5 flat-head screws (25mm or longer), 2 total
Made in China (developed and supervised in Taiwan)
Shelf life: 10 years (unopened)
This product is covered by NT$20 million product liability insurance